LT-3200 Switch
5
Wiring Instructions: Neutral Installation
Please use this if you have a
neutral wire
, typically white, in the installation area. For use of
traveler terminals
with the
LT-3200, more wiring diagrams and information are available within the product manual found at:
https://urcportal.com/
resources-total-control/
Single-Pole Installation (Single Switch)
3-Way Installation (Line/Load in Separate Boxes)
•
The LT-3200 can be used in a 3-way/4-way lighting installation.
•
The Master Load Controller must be defined in URC software.
•
Secondary controllers must be defined in URC software.
•
Multi-Way will not work without prior programming.
•
Traveler Wire is not needed for Multi-Way configurations of
two or more LT-3200s.
• Load
• Line/Hot
• Neutral
• Traveler
• Romex Cable
Use
two or more LT-3200s
for the best
possible user experience.
!
!
URC RECOMMENDATION
