| 23
Media Placement
The unit comes with a painted steel bezel set and a
measured amount of vermiculite to cover the burner.
Install media as follows:
1.
Remove screens
(see page 22).
2.
Remove trim bezel
(see page 23).
3.
Remove front inner glass
(see page 22).
4.
Evenly spread out vermiculite onto burner.
5.
Insert the steel bezel onto the burner
platform; make sure it's sitting flat.
6.
Add any additional options such as
rocks or logs and reassemble unit.
AIRFLOW
(DO NOT
BLOCK)
BURNER
CAUTION:
DO NOT BLOCK AIR SLOTS AROUND BURNER PERIMETER;
POOR FLAME WILL RESULT.
AIRFLOW
(DO NOT
BLOCK)
Initial Setup