| 21
Trim Bezel Removal
The 1-piece trim bezel will need to be removed to access
components and firebox. Remove as follows:
1.
Remove screens.
2.
The trim bezel is not secured into place, simply lift
up and slide forward.
Magnet Bracket Removal
Should the magnet bracket ever need to be replaced it
can be removed as follows:
1.
Remove the front and both side screens.
2.
Locate the magnet bracket (in the areas as shown):
5 on the front, 2 on each side.
3.
Loosen and remove the wing nut as shown and
remove magnet bracket:
4.
Repeat the process in reverse to install the new
parts: