| 19
Burner Removal
The burner may need to be replaced if defected or
damaged. Replace burner as follows:
1.
Remove screens
(see page 22).
2.
Remove trim bezel
(see page 23).
3.
Remove inner front glass
(see page 22)
.
4.
Remove all media from burner platform.
6.
Use a T20 screwdriver to remove the
fasteners (U50 = 6, U70 = 10) securing the burner.
5.
Use a 1/4 socket (magnetized) to remove the
fasteners (U50 = 6, U70=10) securing burner platform.
DO NOT remove remaining burner screws.
7.
Slide the burner to the left and lift out.
Maintenance and Service
Top Light Replacement
Occasionally the top light bulb(s)good will need to be
replaced.
Replace the top light as follows:
1.
Disconnect electrical power to the unit.
2.
Remove screens
(see page 22).
3.
Remove trim bezel (see page 23).
4.
Remove inner glass
(see page 22).
5.
Use a 5/16 socket to remove the 4 fasteners
securing top light assembly; let assembly drop slowly.
6.
Grab connectors firmly at the base and disconnect
from bulb assembly; remove assembly from unit.
7.
Use a T20 screwdriver to remove light
cover. Replace light gasket if damaged.
8.
Replace light assembly (50-1516) or replace bulb with
120V, Halogen G9, 25W and assemble back into unit.
9.
Reconnect electrical power.