22
Initial Installation
QUALIFIED INSTALLERS ONLY
Figure 36: Side Cover Removal
Adjustment Slots
F
Raming
D
ePth
:
The U37 can adjust its front face to account for different framing material thicknesses. It can account for
material thickness ranging from 1/2” to 2”.
1. Remove the safety screen (see
M
aIntenance
a
nD
s
erVIce
- r
eMoVe
s
afety
s
creen
on page 10).
2. Remove the door trim (see
M
aIntenance
a
nD
s
erVIce
- r
eMoVe
D
oor
t
rIM
on page 11).
3. On the inside of the cabinet there are two side covers attached via magnets. Gently pull on the side cover
until they detach and set them aside (see Figure 36).
4. There are thirteen (13) slotted fasteners that need to be loosened to adjust the framing depth. There are
two (2) behind each of the side covers removed in the prior step, four (4) on the outside of each cabinet
side, and one (1) of the top-center of the unit (see Figure 37).
5. With the fasteners loosened, the front face should now be adjustable. All pieces are still connected
to each other and should move as one. Adjust the depth to match the desired framing material then
retighten the thirteen (13) slotted fasteners.
Figure 37: Framing Depth Adjustment
