14
Maintenance And Service
t
oP
L
ight
R
ePLacement
:
1. Disconnect electrical power to the unit.
2. Remove the safety screen, door trim, and glass door (see page 10 to page 11).
3.
Remove light deflector (see Figure 15).
4.
Remove the top light assembly by removing four (4) bolts using a 5/16” socket (see Figure 16).
5.
Grab the connectors firmly at the base to disconnect them from the bulb assembly. Remove assembly from unit
then disconnect the ground wire.
Figure 15:
Light Deflector Removal
Figure 16: Top Light Removal
Top Light Cover
Light Gasket
Light Retainer
Top Light Assembly
T20 Screw
6. Remove the light cover by removing the two (2)
T-20 screws. If light gasket is damaged, contact your
Urbana dealer for replacement.
7. Replace the bulb or light assembly as necessary and
assemble back into unit.
Bulb Specifications: G9 Halogen, 25W, 120V
Enviro Part #: 50-4119
8. Reconnect electrical power.
Figure 17: Top Light Assembly
