52
Secondary Installation
D
RiFtwooD
L
og
s
et
i
nstaLLation
(50-3575)
steP 1
steP 2
Figure 73: Log Set Remove the Porcelain Tray by
removing the seven (7) R20 screws around the board
of the burner recess
.
Figure 74: Remove Rear Mesh strip from underneith the
porcelain tray by undoing the 4 T20 screws. DO NOT
Remove the Front Mesh Strip.
steP 3
If desired, an optional 5 piece Driftwood Log Set can
purchased separately and added to the fireplace.
The log set may be used in conjunction with black
glass media or with the vermiculite media supplied.
The placement of the logs is not arbitrary. If they are
positioned incorrectly, the flames can be impinged
and will not burn correctly creating a hazardous
environment. Carefully set the logs in place using the
figures provided. Wear vinyl gloves when handling the
logs, the ceramic material can irritate your skin. Take
care not to damage the logs as they are very fragile
and can chip easily. If any logs arrive damaged, please
contact your Urbana dealer for replacement.
Figure 75: Using a 5/16 drill bit, drill a hole 1in deep in the rear log as shown above. Insert the log pin that was
suplied with the unit into the hole.