12
b
uRneR
a
ssembLy
R
emovaL
:
1. Remove the safety screen (see
M
aIntenance
anD
s
erVIce
- s
afety
s
creen
r
eMoVal
on page 10).
2. Remove the door trim (see
M
aIntenance
anD
s
erVIce
- D
oor
t
rIM
r
eMoVal
on page 11
).
3. Remove the glass door (see
M
aIntenance
anD
s
erVIce
- G
lass
D
oor
r
eMoVal
on page 11)
Maintenance And Service
4. Remove burner media and log set (if installed).
5. Remove the Porcelain Tray by removing the seven (7)
T20 screws around the boarder of the burner recess (see
Figure 8).
6. Remove the six (6) T-20 screws securing the buner
tray to the firebox mounts (see Figure 9).
7.
Remove the two (2) T-20 screws securing the orifice
mount clamp onto the burner (see Figure 10)
To re-install the burners, follow the steps above in reverse.
When placing the burners back in the unit, be sure not to
move the air shutter. Do not over tighten the burner
screws or they might strip; just get them snug.
Figure 8: Porcelain Tray Removal
The burner will need to be removed for maintenance and fuel conversion. Follow the procedure carefully.
Proceed only when the unit has completely cooled down.
Figure 9: Burner Tray Removal
Figure 10:
Orifice Mount Clamp