ADSL2+ Combo Modem Router
8
4.0 Installation & Setup
Follow each STEP carefully and only go to the next step once you have completed the previous
STEP.
Connection of ADSL2+ Combo Router
If you have a PSTN telephone line (normal analog line) Connect the router as shown below:
1. Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port to ADSL2+ Combo
Router's “
LAN
” Port.
2. Connect the supplied RJ11 telephone cable from your home's telephone jack to the “
LINE
”
port of the supplied ATF085A1R splitter. Connect the other supplied RJ11 telephone cable to
the “
MODEM
” port of the splitter and connect the other end of this cable to the “
LINE
” port of
your ADSL2+ Combo Router.
3. Connect a RJ11 telephone cable to the “
PHONE
” port of the splitter and connect the other end
to your telephone.
4. Connect the power adapter to the power inlet
“POWER”
of the ADSL2+Combo Router and
turn the “
ON/OFF SWITCH”
switch of your ADSL2+ Combo Router on.
