ADSL2+ Combo Modem Router
7
3.0 Hardware Requirements
To use ADSL2+ Combo Router, please have following hardware / accessories ready.
A PC with Pre-installed Ethernet Adapter (Required)
12Vac power adaptor (Included in the package)
RJ-45 Ethernet cable (Included in the package)
RJ-11cable (Included in the package)
3.1 Setting up the Hardware Environment
Please kindly refer to chapter 4.0 “Installation & Setup”
3.2 Powering on ADSL2+ Combo Router
1. Connect the power to the ADSL2+ Combo Router by plugging the power supply into an
appropriate electrical outlet.
2. If the Power LED is off, refer to “Troubleshooting” for information.
Please kindly refer to chapter 4.0 “Installation & Setup”
Note!
Be sure that you are well insulated from any power
source to avoid electricity shock.
Note!
Use only the manufacturer-approved power supply that
shipped with the ADSL2+ Combo Router.
