ADSL2+ Combo Modem Router
6
2.2 Back Panel Connectors
Table 2 shows the function of each connector and switch of the ADSL2+ Combo Router’s rear panel.
Figure 1. illustrate the connectors / Figure 2. illustrate the Power Switch..
Table 2. Function / Description of Connectors
Connector Description
SWITCH
Power Switch, which used to ON / OFF ADSL2+ Combo Router
POWER
Connects to your ADSL router 12V AC power adaptor
RESET
Reset bottom, RESET the ADSL2+ router to its default settings
USB
USB Jack (USB interface) connects to your computer
LAN
RJ-45 Jack (Ethernet Cable) connects to your PC, or HUB
LINE
Connects to your ADSL2+ line – for ADSL2+ Line input
Figure1. Rear View of the ADSL2+ Combo Router
2.3 Factory Default Settings
Before configuration, please refer to following default settings,
Web interface:
Username: admin
Password: 1234
LAN IP Settings:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
DHCP:
DHCP Server: Enable
