ADSL2+ Combo Modem Router
112
A.2 Telnet
I cannot telnet into ADSL2+ Combo Router.
STEPS CORRECTIVE
ACTION
1
Check the LAN port and the other Ethernet connections.
2
Make sure you are using the correct IP address of ADSL2+ Combo
Router. Check the IP address of ADSL2+ Combo Router.
3
Ping ADSL2+ Combo Router from your computer.
If you cannot ping ADSL2+ Combo Router, check the IP addresses of
ADSL2+ Combo Router and your computer. Make sure your computer
is set to get a dynamic IP address; or if you want to use a static IP
address on your computer, make sure that it is on the same subnet as
ADSL2+ Combo Router.
4
Make sure you entered the correct password. The default password is
“1234”.
5
If these steps fail to correct the problem, contact the distributor.
A.3 Web Configuration
I cannot access the web configuration.
STEPS CORRECTIVE
ACTION
1
Make sure you are using the correct IP address of ADSL2+ Combo
Router. Check the IP address of ADSL2+ Combo Router.
2
Make sure that there is not a console session running.
3
Check that you have enabled web service access. If you have
configured a secured client IP address, your computer’s IP address
must match it.
4
For WAN access, you must configure remote management to allow
server access from the Wan (or all).
5
Your computer’s and ADSL2+ Combo Router’s IP addresses must be
on the same subnet for LAN access.
6
If you changed ADSL2+ Combo Router’s LAN IP address, then enter
the new one as the URL.
7
Remove any filters in LAN or WAN that block web service.
The web configuration does not display properly.
STEPS CORRECTIVE
ACTION
1
Make sure you are using Internet Explorer 5.0 and later versions.
2
Delete the temporary web files and log in again.
In Internet Explorer, click
Tools
,
Internet Options
and then click the
Delete Files ...
button.
When a
Delete Files
window displays, select
Delete all offline content
and click
OK
. (Steps may vary depending on the version of your Internet
browser.)
