Upright SL20 Series, Service & Parts Manual

Page: 13 / 104

Page 2-1 SL20
Se
ct
ion
2
O
PERATION
2.1 S
AFETY
R
ULES
U
SE
O
F
T
HE
A
ERIAL
W
ORK
P
LATFORM
:
This aerial work platform is intended to lift persons and his tools as well as the material used for the
job. It is designed for repair and assembly jobs and assignments at overhead workplaces (ceilings,
cranes, roof structures, buildings etc.). All other uses of the aerial work platform are prohibited.
N
EVER
operate the machine without first surveying the work area for surface hazards such as holes, drop-
offs, bumps and debris.
N
EVER
operate the machine if all guardrails are not properly in place and secured with all fasteners properly
torqued. Operating the machine with the door open is prohibited.
C
LOSE
door after mounting platform. Dismantling guard rails or door is prohibited.
N
EVER
use ladders or scaffolding on the platform.
N
EVER
attach overhanging loads or increase platform size. Installation of wind force-increasing parts or
altering the machine is prohibited.
L
OOK
up, down and around for overhead obstructions and electrical conductors.
D
O
N
OT
exceed maximum carrying load. Distribute all loads evenly on the platform. See specifications page
for maximum platform load.
N
EVER
operate the machine when wind speeds exceed 45 km/h (28 mph = 12.5 m/sec) beaufort scale 6).
N
EVER
use damaged equipment. (Contact UpRight for instructions.)
N
EVER
modify operating or safety systems. Deactivating safety systems is prohibited.
I
NSPECT
the machine thoroughly for cracked welds, loose hardware, hydraulic leaks, damaged control cable,
loose wire connections and wheel bolts.
N
EVER
climb down elevating assembly with the platform elevated.
N
EVER
perform service on machine while platform is elevated without blocking elevating assembly.
N
EVER
recharge batteries near sparks or open flame. Batteries that are being charged emit highly explosive
hydrogen gas.
A
FTER
U
SE
secure the work platform against unauthorized use by turning key switch off and removing key.
U
SING
the machine as a crane is prohibited.
I
N STALLATION
or use of components or parts that are not provided by UpRight Inc. is prohibited.
This Machine is
not Insulated
Electrocution Hazard
Never position the
platform without checking
for overhead obstructions.
Collision Hazard
Never elevate or drive elevated on
uneven slopes or soft ground or
elevate the platform unless the
platform is level.
Tip Over Hazard
Never sit, stand or
climb on guardrail or
midrail.
Fall Hazard