Upright SL20 Series, Service & Parts Manual

Page: 22 / 104

Page 2-10
Operation - 2.9 - Specifications
SL20
2.9 S
PECIFICATIONS
Specifications are subject to change without notice.
Hot weather or heavy use may reduce performance.
Meets or exceeds all applicable CE and GS Machinery Directive.
ITEM Specification
Platform Size (Inside toeboards)
.70 m x 2.51 m [ 27.75 in. x 99 in. ] Inside Toeboards
Max. Platform Capacity
Standard w/ Extension 340 kg [750 lbs.]
w/o Extension 340 kg [750 lbs.]
on Extension 110 kg [250 lbs.]
Max. No. of occupants
Standard w/ Extension 2 People
w/o Extension 2 People
on Extension 1 person
Height
Working Height 7.92 m [26 ft.]
Max. Platform Height 7.92 m [20 ft.]
Drivable Height 6.10 m [20 ft.] Standard
Dimensions
Weight, Standard 1411 kg [3,100 lbs.]
Overall Width .84 m [33 in.]
Overall Height 2.00 m [79.0 in.]
Overall Length, Standard 2.58 m [101.50 in.]
Surface Speed
Platform Lowered 3.70 km/h [2.3 mph]
Platform Raised
1.13 km/h [0.7 mph]
Energy Source
24 Volt Battery Pack (4-220 Amp Hour, 6 Volt Batteries, Min. Wt. 28 kg. [62
lbs. each]),
4 HP DC Electric Motor
System Voltage
24 Volt DC
Battery Charger 25 AMP
Battery Duty Cycle
25% for 8 Hours
Hydraulic Tank Capacity
15.2 l [4 US Gallons]
Maximum Hydraulic System Pressure 251 bar [2750 psi]
Hydraulic Fluid
Normal: Above 0° C [32° F]) ISO #46
Low Temp: Below 0° C [ 32° F]) ISO #32
Extreme Temp: Below -17° C [0° F]) ISO #15
Lift System Single Lift Cylinder
Lift Speed
14 seconds
Control System
Proportional Controller, Rotary Selector Switch, and Red Mushroom
Emergency Stop Switch
Horizontal Drive Dual Front Wheel Hydraulic Motors
Tires 381 mm [15 in.] Diameter Solid Rubber, non-marking
Parking Brakes Dual - Spring Applied, Hydraulically Released
Turning Radius (inside)
.64 m [25 in.] Inside
Maximum Gradeability:
25% [14º]
Wheel Base 1.78 m [70 in.]
Guardrails
1.1 m [40 in.] European
Toeboard
152 mm [6 in.]