UPPAbaby Vista 2015, Manual

Page: 7 / 96

11 12
ATTACHING/REMOVING THE SEAT
CANOPY INSTALLATION
STEP 1: Insert metal posts into bumper bar
attachment slots found on both sides of seat.
STEP 2: To remove, press button at bottom of plastic
housing and lift bumper bar out .
PUSHCHAIR ASSEMBLY
ATTACHING/REMOVING THE BUMPER BAR
To Attach Seat: Lower seat onto frame in forward or reverse position
and press down until it clicks into place. Pull up on seat to ensure it is
locked to frame.
To Remove Seat: Simultaneously
push down release buttons
and lift seat from frame .
STEP 2: Snap each side of canopy attachment to
seat frame.
STEP 1: Pull canopy fabric over seat back
recline button.
CARRYCOT ASSEMBLY
STEP 1: Remove mattress.
STEP 3: Pull carrycot canopy handle upright until an
audible “click” is heard.
STEP 2: Pull both steel braces firmly towards the outer
ends of the carrycot into their respective sockets.
Make sure both braces are properly locked in place.
STEP 4: Zip carrycot cover onto carrycot frame.
SETTING UP THE CARRYCOT
0185_VISTA-EU_V2.indd 11-12 9/4/14 11:22 AM