6. Faults and malfunctions
The WehoPuts treatment plant
signal lamp supplies constant infor-
mation on the status of the plant.
Signal lamp on
The plant has no alarms
Signal lamp off
The plant has a malfunction requiring service procedures. The display
reading must be inspected.
Signal lamp fl ashing
The plant has a malfunction which has stopped the process and
requires service. The display reading must be inspected.
The signal lamp is located inside a
cowl at the end of the treatment
plant ventilation pipe.
6.1 Alarms and reminders
The following chart describes the
diff erent alarms and reminders,
their causes and required correc-
tive actions.
The treatment plant alarms and re-
minders are dentifi ed by the signal
lamp. The alarm name is stated on
the control unit display. If there
is more than one alarm, the three
latest unacknowledged alarms
alternate on the display.
NOTE!
•
Only original spare parts may
be used in the WehoPuts
treatment plant. These are
available from Uponor Infra
Ltd and authorised service
vendors!
•
The periodic service and
failure-related service of the
treatment plant are carried
out by the manufacturer or a
manufacturer-authorised ser-
vice centre! The owner of the
property may also carry out
guided service procedures.
•
Put service reports in your
treatment plant folder!
•
Repairs carried out by the
property owner may aff ect the
warranty conditions presented
in the treatment plant war-
ranty certifi cation!
If GSM remote monitoring is used
in the treatment plant, the treat-
ment plant alarms will also be sent
by SMS. The alarms are sent to the
phone number registered in the
control unit (section 4.3).
6.2 Activities during
disturbances
The alarms and reminders are
acknowledged by pressing Enter
twice. Aft er the fi rst press of the
Enter
button, the soft ware asks
if you want to acknowledge the
alarm, and the default setting is
Yes. If you press Enter a second
time, the alarm is acknowledged. If
you do not want to acknowledge
the alarm, chose the No option
with the arrow keys.
You can also acknowledge the
alarm by pressing number key 1,
which will move the soft ware to
alarm acknowledgement confi r-
mation. If you press the Enter
button now, the alarm will be
acknowledged.
23
