Uponor AquaSAFE, Installation Manual, Page: 45 / 72

3. Slide the expander head into the piping until it stops. Full
expansions are necessary to make a proper connection.
4. Press the trigger to expand the piping.
5. Release the trigger, remove the head from the piping, rotate
it
11
⁄
88
turn and slide the head back into the piping. Continue
expanding and rotating until the piping and ring are snug
against the shoulder on the expander head. See Table 7-2.
Important! Rotating the tool between expansions will provide
smooth, even expansion of the piping. Failure to rotate the
tool will cause deep grooves in the piping which can result in
potential leak paths.
Figure 7-22: Slide head into piping
Figure 7-23: Begin expanding
uponor-usa.com | uponor.ca l 39