English
14
Maintanance in the event of a malfunction:
In the event of a malfunction, deactivate the appliance:
- disconnect the appliance from the electricity supply, placed on top of the appliance.
- Contact a Technical Assistance Centre with specially trained personnel.
The components that require maintenance are accessible by opening the box on the back of the prover.
Before calling the Customer Assistance Service:
MALFUNCTION
POSSIBLE CAUSE
SOLUTION
When a maintanance cycle is
started and the prover does
not warm up.
Prover not connect to the power supply
Connect the prover to the power supply
Prover not connect to the oven
Connect the prover to the oven
Cable between the oven and the prover
damaged
Contact the Customer Assistance Service
Power board of the prover damaged
Contact the Customer Assistance Service
Prover heating elements damaged
Contact the Customer Assistance Service
Prover temperature probe damaged
Contact the Customer Assistance Service
When the user starts a prover
program no humidity is created
inside the prover chamber.
Prover not connect to the water supply
Connect the prover to the water supply
Prover Solenoid damaged
Contact the Customer Assistance Service
Prover power card damaged
Contact the Customer Assistance Service
Prover humidity probe damaged
Contact the Customer Assistance Service
Oven-user communication
