Chapter 5: Subsystem Maintenance and Upgrading
Replacing Controller Module Components
5-5
Figure 5-3: Inserting the Controller Module
Step 4.
Reposition the controller module.
Once fully inserted, lift up the
levers at the back of the controller module. This will set the
controller module in the correct position.
Figure 5-4: Lifting the Controller Module Latches Upward
Step 5.
Secure the controller module to the subsystem
by installing the
two (2) screws on the levers. (See
Figure 5-5
)
Figure 5-5: Installing the Controller Module Screws
Step 6.
Re-attach all the cables
that were removed. These include the
cables that connect to the host and the expansion chassis, any
Ethernet cable that was previously attached to the LAN port, and
any cables that were attached to the COM ports.
Step 7.
Power up
the system.
