AR3016G Installation and Hardware Reference Manual
2-8
Installing the Optional BBU
Figure 2-3: Use a Screwdriver to Remove the Metal Sheet
Step 3.
Install the BBU
. After the metal sheet covering the BBU slot has
been removed, the BBU can be installed. To do this, align the
BBU with the slot from which the metal sheet was removed, and
then gently push the BBU into the slot. (See
Figure 2-4
)
Figure 2-4: Install the BBU
Step 4.
Secure the BBU to the enclosure
. Tighten the two (2) retention
screws on the back of the BBU. The BBU comes equipped with a
charger circuit. Once the BBU is properly installed, the
installation process is completed.
