Uniwell SX-330 Operation Manual Download Page 64

Page: 64 / 130

30. Track System - Item Track / Amount Track

Following contents are described in this section;

Two Track Systems

Two Track Number Entry Methods

Two Clerk Track Assignment Methods

Note for Item / Amount Track System used with Clerk Interrupt System

Track Operation Sequences

•

Two Track Systems

--- Item and Amount Track Systems can be used at the same time.

Item Track System

Amount Track System

(optional RAM board required)

Characteristics

- Track is identified by Item Track #.
- Records detailed registration contents.
- Track can be temporarily closed by using

(New Balance) key, until finally

closed by a media key.

- Tax is printed each time the track is

closed or it is printed only when the track
is finally closed by a

Media

key

depending on programming.

- by Amount Track #
- Records only transaction totals.
- Track can be temporarily closed by

using

CHARGE

key, until finally closed

by a media key.

- Tax is printed each time the track is

closed.

# of Items/Track

Registers up to 375 items.
(item includes tax data, transaction data)

Not available

# of Tracks

183 tracks are handled if about 32 items
per track are registered.
(# of tracks handled will change depending
on the # of registered items)

4681 tracks

Track # Entry

One of Automatic or Manual Track #
Method is used.

Manual Track # Method is used.

Track # Display

Displayed in < >.

Displayed in << >>.

Table Assignment

Available when Automatic Item Track #
Method is used.
Also available when Manual Track #
Method is used under Clerk Interrupt
System.

Not available

Pick-Up by Table #

Available only under Non-Clerk Interrupt
System.

Not available

Clerk Track
Assignment

Available

Not available

Post-Bill

Shows the last transaction contents immediately after the track is closed by pressing

BUFFER PRINT

key. This can be used as a Check-Out Bill if Post-Bill is issued each

time the track is closed.

Subtotal Bill

Temporarily closed Item Track contents
printed by

CHECK-OUT BILL

key. This is

used to check the track contents and it can
be used as a Check-Out Bill if
programmed.

Not available

Check-Out Bill

Entire contents of finally closed Item Track
printed by

CHECK-OUT BILL

key.

Not available

Track Transfer

Available

Summary of Contents for SX-330



































































































































Search results

Summary of Contents for SX-330

Reviews:

Related manuals for SX-330

Brands by name

Popular brands

Uniwell SX-330, Operation Manual

Search results

Summary of Contents for SX-330

Reviews:

Related manuals for SX-330

Brands by name

Popular brands