UNIVIEW OET-213H, User Manual

Page: 78 / 97

73
Figure7-44
Add Face Library Interface
Table7-19
Parameter Configuration
Parameter Description and Configuration
Face Library Type
Set the parameter to either of the following options based on the actual conditions:

Employee Library

Visitor Library
Face Library Name
Enter a library name.
A string of 1 to 63 characters can be entered.
Check Template
Select a check template from the drop-down list. Check templates are added on the Check Template
interface.
1:N Match Threshold
The 1:N match is adopted in face recognition. When the match similarity reaches the threshold set
here, the authentication succeeds.
Verify Success
Linkage
Configuration
The options are as follows:

Open door : After the authentication succeeds, a door opening signal is sent to trigger door
opening.

Voice Prompt : A voice prompt is played after the authentication succeeds.

HMI Prompt : A prompt is displayed on the GUI after the authentication succeeds.

Wiegand Output : Data is output through the Wiegand interface after the authentication
succeeds.
Verify Failure
Linkage
Configuration
The options are as follows:

Voice Prompt : A voice prompt is played after the authentication fails.

HMI Prompt : A prompt is displayed on the GUI after the authentication fails.

Modifying a face library
(1) Select a required face library and click Edit .
(2)
In the displayed Edit Face Library interface, modify parameters by referring to the description in Adding a
face library .