44
Figure7-14
Static Address Configuration Interface
Table7-3
Parameter Description and Configuration
Parameter
Description and Configuration
Network Isolation
Keep the default value
Off
. It cannot be configured.
IP Address
Enter the IP address of the device.
The IP address of the device must be unique across the network and cannot begin
with 127.
Subnet Mask
Enter the subnet mask of the device.
Default Gateway
Enter the default gateway of the device.
When
Obtain IP Address
is set to
PPPoE
, complete the configuration by referring to the figure below.
If the face recognition terminal is connected to the network through Point to Point over Ethernet (PPPoE), you
need to select PPPoE as the IP obtainment mode.
Figure7-15
PPPoE Configuration Interface
Table7-4
Parameter Description and Configuration
Parameter
Description and Configuration
Username
Enter the username and password provided by your internet Service Provider (ISP).
Password
NOTE!
This function is not supported by some models. Please see the actual model for details.
When
Obtain IP Address
is set to
DHCP
, complete the configuration by referring to the figure below.
The Dynamic Host Configuration Protocol (DHCP) is enabled by default when the face recognition terminal is
delivered. If a DHCP server is deployed in the network, the face recognition terminal can automatically obtain an
IP address from the DHCP server.
Figure7-16
DHCP Configuration Interface
