11
www.universe-thermostat.com
Vacation Setup
You can set a vacation hold on your thermostat if you are going to be away for an extended
length of time. This feature is used to save energy while residents are away. If in heating
season, you can allow the suite to get cooler than if you were home. If in cooling season, you
can allow the suite to get warmer than if you were home.
Access vacation setup through settings or through operating modes.
To setup a vacation hold:
1
Select vacation setup in the middle of
the top row on the settings page.
2
Choose SET UP.
3
Using the up and down arrows, choose your
vacation start date and start time.
a
Select next in the top right corner.
4
Using the up and down arrows, choose your
vacation end date and time.
a
Select next.
5
On the left-hand side, choose your operating
mode (Auto, Heat or Cool).
6
Select your temperature setting(s). Auto mode
requires a heat and cool set point.
7
Select save in the top right corner.
Heat mode puts the system into heating to
produce hot air
Cool mode puts the system into cooling to
produce cold air
Auto mode puts the system into heating or
cooling automatically depending on the set temperatures
Ending Vacation Hold
When your vacation is over and you’re ready to resume normal operation, you must end your
vacation hold. To do so:
1
Select Vacation Setup.
2
Select Stop Vacation on the right.
3
Press Home in the top right corner.
4
2
7
5
6
VACATION START
JAN
20
2019
:
10
10
00
AM
CANCEL
NEXT
a
3
4