15
www.universe-thermostat.com
Vacation Hold
Access vacation setup through settings or through operating modes.
To set up a vacation hold:
1
Select vacation setup in the middle of the top row on the settings page.
2
Choose
SET UP.
3
Using the up and down arrows, choose your vacation start date and start time.
a
Select next in the top right corner.
4
Using the up and down arrows, choose your vacation end date and time.
a
Select next.
5
On the left-hand side, choose your operating mode (Auto, Heat or Cool).
6
Select your temperature setting(s). Auto mode requires a heat and cool set point.
7
Select save in the top right corner.
Heat mode puts the system into heating to produce hot air
Cool mode puts the system into cooling to produce cold air
Auto mode puts the system into heating or cooling automatically depending on
the set temperatures
Ending Vacation Hold
When your vacation is over and you’re ready to resume normal operation, you must end your
vacation hold. To do so:
1
Select Vacation Setup.
2
Select Stop Vacation on the right.
3
Press Home in the top right corner.
5
