34
NOTES:
•
If gas cylinder has just been connected, please wait at least 1
minute for the air to enter the hose.
•
When the flame light comes on, make sure the control button
is pressed when the ignition button is pressed. The control
button can be released once the flame indicator has been lit.
•
You can check the flame
pilot from the small window
located on the product. If
the flame does not light,
press control button for
another 30 seconds.
To turn off the device:
•
Turn the control knob to
"PILOT" position.
•
Press and turn the control
knob to "OFF" position.
•
Close the gas valve on the
gas cylinder.
7.
CLEANING AND MAINTENANCE
If the product is not going to be used for a long period it is
recommended to check the following notes:
•
Make sure the gas valve is closed properly and remove the
gas regulator kit from the product.
•
Check the gas hose for damage or malfunction. If the hose is
not in perfect condition, purchase a new hose or contact the
hose supplier.
•
Never store gas cylinders in places without adequate
ventilation.
