23
•
This appliance must be installed in accordance with
current regulations.
•
Do not block any ventilation holes.
•
Do not move the device when it is in operation.
•
Close the gas valve before moving the appliance.
•
The regulator hose should be checked frequently (at
least once a month and every time the gas cylinder
is replaced). If it shows signs of deterioration it
should be replaced with a hose with same length
and similar quality.
•
Gas regulator hose must be changed regularly at the
intervals prescribed by the manufacturer.
•
Use only the type of gas indicated by the
manufacturer.
•
In case of high or extreme wind, it is recommended
not to use the device as it could tip over and cause
damage or fire.
•
Injector installed in this device is not designed for
extraction.
•
Do not connect the gas cylinder directly to the
appliance without a regulator.
•
The hose used must comply with EN16436: 2014
and gas regulator must comply with EN16129:
2013. Regulator must be regularly replaced based
on national regulations.
•
Use the regulator for butane/propane from any of
the following categories:
o
Controller 30mbar I37P(30)
o
Controller 30mbar I3 + (28-30 / 37)
o
Regulator 37mbar I3 + (28-30 / 37)
o
50 mbar I3B / P regulator (50)
