manualshive.com logo in svg

Universal MSC-400, Reference Manual

Share
Download
Universal MSC-400 Reference Manual Download Page 63

MSC-400 Reference Manual 

Rev 4 

      

 

 

 

63

1c

 

 

 Configuration Window Serial Port Setting 

 

2. 

Under SERIAL PORT SETTING, click the PORT to which the DEVICE BEING COND is 
CONNECTED. (Port 7) 

3. 

Per the device manufacturer’s specifications, set the BAUD RATE, DATA BITS, PARITY and STOP 
BITS, using the respective pull-downs. 

4. 

Double click directly under DESCRIPTION (ex. Edit Control).  

a) 

The PORT INFORMATION SETTING WINDOW will appear.  Port Information Setting Window. 

 

 

 

9.  Enter the TYPE of device, (ex. CD) and any other specific useful information, up to 31 characters in 

the TEXT BOX.  

10.  In the PORT INFORMATION SETTING WINDOW, click OK to SAVE. 
11.  Repeat STEPS 2-4 for any additional SERIAL DEVICES connected to PORTS 8-12. 
12.  Click OK. The window will close and the Port Configuration(s) will be saved. 

 

2 

3 

4 

8 

5 

6

Summary of Contents for MSC-400































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands