manualshive.com logo in svg

Universal MSC-400, Reference Manual

Share
Download
Universal MSC-400 Reference Manual Download Page 11

MSC-400 Reference Manual 

Rev 4 

      

 

 

 

11

VID-6 VIDEO SENSOR CABLE

 

The VID-6 Video Sensor Cable is a special cable assembly that connects the composite video output of a 
connected device to a Video or Voltage Sensor Input on the MSC-400 rear panel. This method provides 
excellent conditional status sensing with devices that feature a switched composite video output. Not all 
devices turn the composite video output off when in standby – some switch to a black screen. A black 
screen looks off and protects some types of video displays from ‘burn in’, but there is still a sync code 
present that is not compatible with video sensing for ON/OFF status. For devices that output a black 
screen, use a VS-1006 Voltage Power Sensor from a switched outlet (or status output on the device if 
available), a sensed AC outlet that outputs 12V or discrete IR ON/OFF codes or RS232 commands. 
 

VID-6 Video Sensor Cable Features 

 

 

 

 6 VID-6 Video Sensor Cable 

 

29. 

RCA Plug – 

One RCA plug connects to the composite video output of a system Connected Device. 

Typically, unless multiple composite outputs are available, a Y adaptor can be used to connect the 
device video output to both the video input the signal is being sent to (Video Display) and the MSC-
400 sensed input with no loss of signal quality. 

 

30. 

Sensor Plug – 

One four-circuit 3.5 mono mini plug connects to one of the Video or Voltage Sensor 

Inputs on the MSC-400 rear panel. 

 
 

 

Summary of Contents for MSC-400































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands