Universal 79110 Owner'S Manual Download Page 15 | Manualshive

Page: 15 / 20

background image

15

Please contact Universal

®

Gym Equipment/FFA Corp. for missing or defective parts at one of the following:

Phone 1-800-

472-9856 or Fax 1-662-495-5038 or E-mail at [email protected].

Mailing

address: Universal

®

Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.

Website www.universalgymequipment.com

FIGURE 5

Step 51

Step 52.

Step 53.

Step 54.

Step 55.

Step 56.

NOTE:

The AB CABLE (40) has a hook on each end.

A1

Insert AB CABLE (40) through slot in LEG EXTENSION (12). With AB CABLE in groove on bottom of PULLEY (50),
attach PULLEY to LEG EXTENSION with 3/8” x 2-1/2” HEX HEAD BOLT (71), 3/8” WASHERS (83) and 3/8” NYLON
NUT (86).

A2

Insert AB CABLE (40) into front of BASE FRAME (1), push until you can pull it up through rear slot in BASE FRAME.
With AB CABLE in groove on bottom of PULLEY (50), attach PULLEY to BASE FRAME with 3/8” x 3” HEX HEAD
BOLT (70), 3/8” WASHERS (83), 3/8” BUSHINGS (57) and 3/8” NYLON NUT (86).

A3

With AB CABLE (40) in groove on bottom of PULLEY (50), attach PULLEY in rear slot of slot in BASE FRAME with 3/
8” x 3” HEX HEAD BOLT (70), 3/8” WASHERS (83), 3/8” BUSHINGS (57) and 3/8” NYLON NUT (86).

A4

Place AB CABLE (40) in groove of PULLEY (50) and attach at desired location in FLOATING PULLEY BLOCK (17)
with 3/8” x 1-3/4” HEX HEAD BOLT (72) and 38” NYLON NUT (86).

A5

With AB CABLE (40) in groove on bottom of PULLEY (50), attach PULLEY in front slot in BASE FRAME (1) with 3/8”
x 3” HEX HEAD BOLT (70), 3/8” WASHERS (83), 3/8” BUSHINGS (57) and 3/8” NYLON NUT (86).

A6

Insert AB CABLE (40) through slot in FRONT SUPPORT (2). With AB CABLE in groove on top of PULLEY (50) attach
PULLEY to FRONT SUPPORT with 3/8” x 3” HEX HEAD BOLT (70), 3/8” WASHERS (83), 3/8” BUSHINGS (57) and 3/
8” NYLON NUT (86).

«
...
13
14
15
16
17
...
»

Summary of Contents for 79110





















Reviews:

No comments

Related manuals for 79110

Brand: NordicTrack Pages: 27

MARCY DELUXE MD-5191

Brand: Impex Pages: 21

Brand: ParaBody Pages: 9

807 BODY SYSTEM

Brand: ParaBody Pages: 18

Brand: Body Solid Pages: 22

Body Power it 6000

Brand: Body Max Pages: 16

C90master Blaster Bench

Brand: Weider Pages: 2

Brand: Weider Pages: 23

390 L 831.15928.1

Brand: WeiderPro Pages: 20

Brand: WeiderPro Pages: 20

Brand: Hoist Fitness Pages: 30

Brand: Free Spirit Pages: 22

Brand: Betersport Pages: 8

roger black series

Brand: Argos Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands