Universal 79110 Owner'S Manual Download Page 9 | Manualshive

Page: 9 / 20

background image

9

Please contact Universal

®

Gym Equipment/FFA Corp. for missing or defective parts at one of the following:

Phone 1-800-

472-9856 or Fax 1-662-495-5038 or E-mail at [email protected].

Mailing

address: Universal

®

Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.

Website www.universalgymequipment.com

FIGURE 2

Step 16.

Step 17.

Step 18.

Step 19.

Step 20.

Step 21.

Step 22.

Step 23.

Step 24.

Step 25.

Step 26.

Step 27.

Step 28.

Step 29.

Step 30.

Step 31.

Push 45mm SQUARE PLUGS (52) into end of ADJUSTABLE BACK ARM (13).

Thread SPRING KNOB (59) and POP PIN (60) into BASE FRAME (1) as shown.

Slide one FOAM PAD (37) onto end of each BOLSTER (20) and lock in place with 5/16” WASHER (LARGER) (89),
CAP FOR BOLSTER (55) and 5/16” x 1/2” INNER HEX HEAD BOLT (63).

Insert one BOLSTER (20) through ADJUSTABLE TUBE (11) and slide on other FOAM PAD (37) and lock in place with
5/16” WASHER (LARGER) (89), CAP FOR BOLSTER (55) and 5/16” x 1/2” INNER HEX HEAD BOLT (63).

Pull out on POP PIN (60) and insert ADJUSTABLE TUBE (11) into BASE FRAME (1) and release POP PIN at desired
position to lock in place.

Attach LEG EXTENSION (12) to BASE FRAME (1) with 5/16” x 5/8” INNER HEX BOLTS (77), 5/16” SPRING WASH-
ERS (81), 5/16” WASHERS (84) and 1/2” LEG AXLE (44).

Attach ROLLER BRACKET (19) to LEG EXTENSION (12) with 1/2” x 3-1/4” HEX HEAD BOLT (66), 1/2” WASHER (82)
and 1/2” NYLON NUT (85).

Insert BOLSTER (20) through ROLLER BRACKET (19) and slide on other FOAM PAD (37) and lock in place with 5/16”
WASHER (LARGER) (89), CAP FOR BOLSTER (55) and 5/16” x 1/2” INNER HEX HEAD BOLT (63).

Push 25mm x 50mm END PLUG (51A) into SEAT ARM (15).

Attach SEAT PAD (36) to SEAT ARM (15) with 3/8” x 1-3/4” HEX HEAD BOLT (73) and 3/8” WASHERS (83).

Attach ADJUSTABLE SEAT TUBE (16) to SEAT ARM (15) with 3/8” x 3” HEX HEAD BOLT (70), 3/8” WASHERS (83)
and 3/8” NYLON NUTS (86).

Pull out on SPRING KNOB (59), insert ADJUSTABLE SEAT TUBE (16) and release SPRING KNOB at desired height
to lock in place.

Attach BACK SUPPORT (18) to FRONT UPRIGHT (2) with 1/2” x 3” HEX HEAD BOLTS (67),1/2” WASHERS (82) and
1/2” NYLON NUTS (85).

Thread SPRING KNOB (59) into BACK SUPPORT (18) as shown.

Attach BACK PAD (35) to ADJUSTABLE BACK ARM (13) with 3/8” x 1” HEX HEAD BOLTS (74) and 3/8” WASHERS
(83).

Pull out on SPRING KNOB (59) in BACK SUPPORT (18) and insert ADJUSTABLE BACK ARM (13) into BACK
SUPPORT and release SPRING KNOB at desired position to lock in place.

«
...
7
8
9
10
11
...
»

Summary of Contents for 79110





















Reviews:

No comments

Related manuals for 79110

Brand: ParaBody Pages: 13

Brand: Nautilus Pages: 26

Brand: Vectra Fitness Pages: 17

Brand: Exertec Pages: 11

ABShaper 831.280752

Brand: Weider Pages: 6

Functional Strength

Brand: Horizon Fitness Pages: 55

Brand: Hoist Fitness Pages: 57

Brand: D.C. Athletics Pages: 8

Brand: ParaBody Pages: 3

Brand: Inspire Pages: 19

Brand: Inspire Pages: 21

Brand: Taurus Pages: 52

Brand: Echanfit Pages: 16

Brand: Barbarian line Pages: 21

Boulder Fit Door Gym

Brand: Stamina Pages: 8

Brand: Stamina Pages: 15

Brand: Stamina Pages: 18

AeroPilates Performer XP615

Brand: Stamina Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands