Universal 79110 Owner'S Manual Download | Manualshive

Page: 11 / 20

background image

11

Please contact Universal

®

Gym Equipment/FFA Corp. for missing or defective parts at one of the following:

Phone 1-800-

472-9856 or Fax 1-662-495-5038 or E-mail at [email protected].

Mailing

address: Universal

®

Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.

Website www.universalgymequipment.com

FIGURE 3

Step 32.

Step 33.

Step 34.

Step 35.

Step 36.

Step 37.

Step 38.

Thread POP PIN (60) into PRESS ARM (8).

Push 2” ROUND END PLUGS (53) into ends of PRESS ARM (8).

Insert ROLLER HANDLE BARS (14) into PRESS ARM (8) and fasten with 1/2” NYLON NUT (85), 1/2” WASHER (82)
and 1/2” CAP FOR NUT (54).

Attach one BEARING HOUSING (29) to TOP FRAME (3) with 1/2” x 1-3/4” HEX HEAD BOLTS (68), 1/2” WASHERS
(82) and 1/2” NYLON NUTS (85). See DETAIL.

With PINS to rear insert axle of PRESS SUPPORT (7) into mounted BEARING HOUSING (29). Slide other BEARING
HOUSING onto axle and attach to TOP FRAME (3) with 1/2” x 1-3/4” HEX HEAD BOLTS (68), 1/2” WASHERS (82)
and 1/2” NYLON NUTS (85). Using an allen wrench, tighten SET SCREWS in both BEARING HOUSINGS.

Attach PRESS ARM (8) to PRESS SUPPORT (7) with 1” PRESS ARM AXLE (9) and SPACERS (88).

Pull out on POP PIN (60), swing PRESS ARM (8) to desired position and release POP PIN to lock in place.

IMPORTANT:

The BEARING HOUSHINGS (29) have SET SCREWS on one side. The BEARING

HOUSINGS

must

be mounted with the SET SCREWS to the

outside

as shown in DETAIL.

«
...
9
10
11
12
13
...
»

Summary of Contents for 79110





















Reviews:

No comments

Related manuals for 79110

Brand: Marcy Pages: 27

Brand: Nautilus Pages: 34

Brand: BODY ALIVE Pages: 17

Brand: Horizon Fitness Pages: 15

Iron Grip Strength IGS-4350

Brand: Impex Pages: 29

Brand: Freemotion EPIC Pages: 16

Brand: PaceMaster Pages: 29

Brand: Impex Pages: 12

Brand: Impex Pages: 13

Brand: LAMAR Pages: 24

Brand: Matrix Pages: 2

Brand: Matrix Pages: 2

Brand: Body Solid Pages: 8

Brand: Master Pages: 67

Brand: Super Gym’s Pages: 15

LifeRower LR8500

Brand: Life Fitness Pages: 3

Brand: Life Fitness Pages: 4

Brand: Life Fitness Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands