18
POWER Allocation
When in AV Mode, the FOXTEL iQ Remote can be programmed to control
the power of the television, amp/tuner or DVD/VCR. When in FOXTEL mode
it will control the power of the FOXTEL iQ. If more than one device code is
programmed into the FOXTEL iQ Remote it is possible to switch between
which one the FOXTEL iQ Remote when the
power
button is pressed. This
function is called Power Allocation.
When television, amp/tuner and/or VCR/DVD codes have been programmed:
1.
To switch to having the FOXTEL iQ Remote control the power function of
your television press and hold the
select
button then also press the
7
button.
2.
To switch to having the FOXTEL iQ Remote control the power function of
your amp/tuner press and hold the
select
button then also press the
8
button.
3.
To switch to having the FOXTEL iQ Remote control the power function of
your VCR/DVD press and hold the
select
button then also press the
9
button.
Note: The power button is allocated in the following priority: television,
amp/tuner then VCR/DVD
POWER Direct
The Power Direct feature gives the
power
button of the FOXTEL iQ
Remote the same function in FOXTEL mode as when it is in AV mode.
1.
Press the
av
button on the FOXTEL iQ Remote.
2.
Press and hold the
select
button, then press and hold the
red
button.
Keep both buttons held down until the LED on the FOXTEL iQ Remote
flashes twice.
3.
Press
9 6 3
(the LED will flash twice).
4.
Press the
av
button. The LED will flash twice to indicate that the Power
Direct feature has been set. The FOXTEL iQ Remote will now control
the power of your television even when in FOXTEL mode.
To reset the Power Direct feature and have the power button control the
FOXTEL iQ, the following programming sequence needs to be performed.
1.
Press the
av
button on the FOXTEL iQ Remote.
2.
Press and hold the
select
button, then press and hold the
red
button.
Keep both buttons held down until the LED on the FOXTEL iQ Remote
flashes twice.
3.
Press
9 6 3
(the LED flashes twice).
4.
Press the
power
button. The LED will flash twice to indicate that the
Power Direct feature has been reset. The FOXTEL iQ Remote will now
control the power function of the FOXTEL iQ when in FOXTEL mode.
FOXTEL_PVR_opmaak 15-02-2006 09:50 Pagina 18