19
POWER Macro
When in AV Mode, the Foxtel iQ Remote is able to be programmed with
codes that enable it to control the power of the television or amp/tuner or
DVD/VCR. When in FOXTEL mode it will control the power of the FOXTEL
iQ. If more than one device code is programmed into the FOXTEL iQ
Remote it is possible to have the FOXTEL iQ Remote the power function of
all three devices in sequence when the
power
button is pressed.
This function is called Power Macro.
To activate the Power Macro:
1.
Press
av
button on the FOXTEL iQ Remote.
2.
Press and hold the
select
button, then press and hold the
red
button.
Keep both buttons held down until the LED on the FOXTEL iQ Remote
flashes twice
3.
Press
9 9 5
.
4.
Press the
power
button.
5.
Press
av
button.
6.
Press
select
, the LED will flash twice.
7.
When Power Macro is set the
power
button sends the power function
of all devices programmed in the sequence of: television, amp/tuner,
VCR/DVD.
When television, amp/tuner and/or VCR/DVD codes have been
programmed and the Power Macro feature has been enabled, the
power
button will send the power function for all devices with one press of
the
power
button. Should you wish to exclude a device from the Power
Macro function, perform the following steps:
1.
To exclude the Power Macro from controlling the power function of
your television press and hold the
select
button then also press
the
7
button.
2.
To exclude the Power Macro from controlling the power function of
your amp/tuner press and hold the
select
button then also press
the
8
button.
3.
To exclude the Power Macro from controlling the power function of
your VCR/DVD press and hold the
select
button then also press
the
9
button.
Note: If the Power Macro is not set, the <<Select
+
digit>> will perform power
allocation
Note: Power Macro can be used with Power Allocation to enable
programmed devices to be switched on/off when the FOXTEL
iQ Remote Control is in FOXTEL mode
To deactivate the Power Macro:
1.
Press
av
button on the FOXTEL iQ Remote.
2.
Press and hold the
select
button, then press and hold the
red
button. Keep both buttons held down until the LED on the FOXTEL
iQ Remote flashes twice
3.
Press
9 9 5
.
4.
Press the
power
button.
5.
Press the
power
button again.
Hint: When using the Power Macro the on/off states of your devices can
become unsynchronised, that is the television might be on but the
amp/tuner off – pressing the
power
button will turn the television off but
the amp/tuner on. This is because on most devices the power function is a
toggle, the same command turns the device on as turns the device off. To
overcome this, cover the front of the FOXTEL iQ Remote with your hand
when it is sending to the device you don’t want to change. The Power
Macro first send the command to the television then the AMP/TUNER then
the VCR/DVD, the three commands are sent about half a second apart.
FOXTEL_PVR_opmaak 15-02-2006 09:50 Pagina 19