English
PAG
.
48
rev 1.0
7.2.5. RECORD PATH
In this option you will have to select the HDD partition where will
be saved your recordings.
7.2.6. FORMAT DISK
This option will format the hard disk, erasing it completely.
When you select this option, a window appears and asks for a
password to format the hard disk. If it has not been modifi ed, it
is by default the code “0000”.
Once this code is given, the hard disk will be formatted and you
will lose all the saved recordings.
Note:
This process is irreversible. Once you have selected this
option and you have given the password, the data will be lost.
7.3.- HDD INFORMATION
In the HDD information submenu you can see the capacity
of the hard disk. You also see the free space available (OSD
116).
7.4. UPGRADING THOUGH USB
This option allows updating the software of the receiver with the
received data from a USB 2.0 memory device. To do it, connect
a USB 2.0 memory device to the receiver and accede to this
menu option (OSD 116).
The last software version to be loaded must be placed at the
root path of your USB device.
1. Upgrade mode: Select with [
], the mode of
upgrading.
2. Update fi le: Select with [
], the name of the fi le to be
loaded.
3. Select “Start” and press [OK]. An alert message appears
indicating not to take out the memory device during the loading
process.
4. Once the fi le has been loaded, it requires the conformity
to end the upgrading process, writing into the receiver the
upgrading. Press [OK] to upgrade the receiver (OSD 117). In
case during the reading of the fi le, it is corrupted or it would be
a not appropriated for this model of receiver, an alert message
would appear “Error reading the USB disk”.
5. After pressing [OK] the receiver will write into the Flash
memory, and it will reboot to end the upgrading process.
For further information about the upgrading of the receivers,
please visit http://www.universbyfte.com, in the chapter about
upgrading receivers.
OSD 116
OSD 117
DVR MANAGEMENT
Summary of Contents for U4123E
Page 1: ...U4123E ...
