Univers by FTE U4123E, User Manual

Page: 27 / 50

PAG . 27
English
rev 1.0
3.5. DELETE ALL
To delete all channels:
1. Enter the password. The default password is “0000”.
2. After entering the password correct a safety question will
show up where you have to confi rm fi rst (OSD 41).
3. Select “Yes” to delete all channels or “No” to cancel and
confi rm with [OK].
4. In step 2 and step 3, pressing [Exit] will exit the function
directly without saving.
? FREQUENTLY ASKED QUESTION
Q: IF I incautiously delete all channels, what should I do?
A: There are three ways to restore:
- To re-search all channels at the “Installation” menu.
- Use “Factory Default” function to restore all channels in the
“Tools” menu. The receiver will load the factory channels.
- Use the “Restore channel list and settings” option as next
point shows.
3.6. RESTORE CHANNEL LIST AND SETTINGS
Using this option, the receiver will load the channels saved as
previously as a backup of the user channels list (see point 3.7.).
For restoring the default channels, please:
1. Enter the password. The default password is “0000”.
2. After entering the password correct a safety question will
show up where you have to confi rm fi rst (OSD 42).
3. Select “Yes” to delete all channels or “No” to cancel and
confi rm with [OK].
4. In step 2 and step 3, pressing [Exit] will exit the function
directly without saving.
3.7 SAVE CHANNEL LIST AND SETTINGS
This option is very important, because here is where the security
of your data lies. This option makes a backup of the channel
list and it will allow restoring the channel list even thought after
a factory default.
Once you have customized your receiver and everything
operates properly, you have the possibility, with this option, to
save the programs’ data.
1. Enter the password. The default password is “0000”.
2. After entering the password correct a safety question will
show up where you have to confi rm fi rst (OSD 43).
3. Select “Yes” to delete all channels or “No” to cancel and
confi rm with [OK].
4. In step 2 and step 3, pressing [Exit] will exit the function
directly without saving.
CHANNEL
OSD 40
OSD 41
OSD 42
OSD 43