English
PAG
.
4
rev 1.1
this case, please follow installation steps to search the channels.
In order to move through the different options of this menu, please use the keys [
] of your remote
control. If a “Short circuit on the LNB” message is shown on the TV, please check the connections
before continuing the installation.
Language
: press [
] to select languages. The selection of languages include: English, German,
French, Italian, Portuguese, Spanish, Turkish, Polish, Hungary and Arabic.
First Audio
: Some channels offer more than one audio language. This function allows you to set the
preferred audio language for those channels using [
]. If a channel offers the same audio language
as the “First Audio” you set the system will play this audio language as default. If the channel does
not offer this audio language then the system will compare the offered languages with the second
audio language. The selections of audio languages include: English, French, German, Russian, Arabic,
Portuguese, Turkish, Spanish, Polish and Italian.
Second Audio
: If the channel has no audio language that corresponds with “First Audio” but with “Second
Audio” the system will play the second audio language as default. If no audio language corresponds
with the “Second Audio” then the default language of the current channel will be played instead. The
selections of audio languages include: English, French, German, Russian, Arabic, Portuguese, Turkish,
Spanish, Polish and Italian.
LNB Power
: Here you can set the power output to the LNB. If your receiver is connected to the LNB
directly then you need to set the LNB Power to “On”. If your receiver is connected to a multi switch
(SMATV signal distribution system) then it may be that you don’t need to provide the power to the LNB.
But since this is depending on the kind of installed distribution system we recommend you to contact
your installer or to refer to the user manual of this system to get the correct information.
Antenna Setup
: You can edit the following items (Image 2):
1. Satellite: Press [
] to switch Satellites or press [OK] to enter satellite list to select directly.
2. LNB Configuration: Selecting this option and pressing [OK], the LNB Configuration menu will be
displayed. In this menu, next options can be modified (Image 3):
- LNB Type: Press [
] to switch among “Standard”, “User” and “Universal” mode. If you select
“Standard” or “User”, the frequency of the LNB can be changed. Pressing [OK] the frequencies will
appear to be edited. Select the frequency you want to edit and change the value with [
]
- 22K: Use [
] to switch “ON” and “Off”. The 22 kHz signal is used in KU Universal LNBs to chan-
ge between low band and high band. After choosing LNB type “Universal” you cannot modify 22K.
- DiSEqC1.0: Use [
] to switch the options of DiSEqC switches.
IMAGE 2
IMAGE 3
QUICK INSTALLATION GUIDE
Summary of Contents for U4111
Page 1: ...U4111 ...