![background image](http://html1.mh-extra.com/html/univers-by-fte/u4111/u4111_user-manual_845775012.webp)
English
PAG
.
12
rev 1.1
PANEL & REMOTE CONTROL DESCRIPTION
1. PANEL & REMOTE CONTROL DESCRIPTION
1.1. FRONT PANEL DESCRIPTION
1. POWER: Switches the receiver on, or enters standby mode. To completely switch off the receiver,
you have to use the switch on the back of the receiver.
2. POWER LED: Indicates that the mains voltage (90-230 VAC) is available.
3. LOCK LED: Indicates a sufficient signal level at the IF IN input.
4. DISPLAY: 4 Digits to display the program numbers.
5. IR-SENSOR: Reception sensor for the IR remote control signals.
6. CH+/-: These buttons allow changing the current channel.
1. IF OUT: Satellite output for cascading to other devices.
Note: The operation of another receiver at the same time is only possible with limited channel
selection.
2. IF IN: Satellite input.
3. S/PDIF: Optical output for digital audio (AC3).
4. S/PDIF: Coaxial output for digital audio (AC3).
5. RS-232: Serial Port allowing software upgrades.
6. ANT IN: Antenna input for the terrestrial antenna.
7. TO TV: Modulator output for the connection to a TV set.
8. AC IN: Mains input cable.
9. POWER ON/OFF: Allows to completely switching off the receiver.
10. VIDEO / AUDIO: HiFi Outputs for stereo set or monitor
11. TV SCART: Output SCART for the connection to a TV set.
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
10
11
Summary of Contents for U4111
Page 1: ...U4111 ...