4
This appliance has a ‘Y’ type supply cord connection and must be installed by a licensed
Electrician, who will ensure that the stove is correctly connected and
safely earthed
.
After installation, inspect the unit to make sure all connections are secured and
properly installed/tightened.
If the supply cord is damaged for whatever reason, it must be replaced immediately.
The rated current is printed on the serial number label which is attached to the upper
back panel of the stove. The appliance must be connected to the mains through an
isolator switch with a minimum clearance of 3mm between the contacts.
Electrical installation (Model U305/U305-1 only)
Insert the plug into a 230V 16A, earthed wall socket. The stove is a plug-in model with
a 16A power supply. It is therefore not possible to use all the elements at the same
time. Set the selector to the required position.
Do not set the knob to the unmarked
position.
B-
CONNECTION TO THE POWER SUPPLY