Univa 500 Series, Instruction Manual

Page: 5 / 20

5
Free-standing stoves must be positioned firm and placed at least 25mm from the wall.
Anti-Tilt mechanism (Stabilizing bracket) – For 500mm range stoves only
Safety regulations stipulate that the Anti-Tilt mechanism supplied with the stove, must
be fixed as shown.
IMPORTANT : The instructions below are only relevant to the 500mm-range stoves.

“A” 1 x Anti-Tilt chain.

“B” 1 x Anti-Tilt hook with anchor sleeve.

“A” is factory fi tted at the rear of the stove.

Position the stove and move “A” to touch the wall behind the stove.

Mark the hole where “A” touches the wall behind the stove.

Move the stove away from the wall to allow for an area to work in.

Using a 6.0 mm concrete drill bit, drill a hole at the marked position.

Using the stability hook and anchor sleeve “B”, firmly secure “B” to the wall.

Slide the stove back in the position and engage the stability chain “A” onto the
stability hook “B”.
C- INSTALLATION