Unitek BAMOCAR-D3, Manual

Page: 8 / 46

8
BAMOCAR D3
Construction :
Compact equipment
Acc. to VDE-DIN-EG- standards.
IP 65 protection against accidental contact with power connections.
Power electronics for ( S1 operation ) 125 A, 200 A,(peak 250A, 400A)
Input power range nom. 12 to 700 V =
Liquid cooling ( special construction air cooling)
Unified digital controller electronics)
Independent 12/ 24V DC chopper power unit for auxiliary power.
Galvanic isolation
-Galvanic isolation between power connector, motor connector and all other
control connectors
-Galvanic isolation between auxiliary voltage and all other voltages.
-Housing and radiator assembly are galvanically isolated from all electric parts.
-The air and creepage distances comply with VDE.
- No internal insulation monitor. Y2 capacitors to housing.
The following are used:
IGBT – power semi conductor
- Generously dimensioned.
- Only commercially available parts in industry standard.
- SMD –mounting
- 7 segment led indicators ( option)
Features
* Battery connection 12 v = to 700 volts = ( dc supply, observe limitations)
* Independent auxiliary supply 24 v = or 12 v =
* Digital interfaces RS 232, can- bus ( additional option)
* 2 analog inputs, programmable differential inputs
* 4 digital in- out puts, programmable, optically isolated
* Reference value ramps linear, non linear ( s – function)
* Release and limit -switch logic.
* BTB – operation ready, solid state relay contact.
* Position
, rpm and torque control
* Resolver or encoder – incremental encoder TTL , SINCOS 1Vss,
* Rotor p bl tacho.
* Encoder output or 2. encoder input.
* Static and dynamic current limit
* Unified full digital regulator unit
* Safety shutdown in case of over voltage, under voltage and over temperature from
motor.
* Self protected short circuit proof power part. processor independent hardware -shut
down in case of short circuit, earth fault , over voltage and over temperature of
amplifier.
Fe
a
tu
re