Unitek BAMOCAR-D3, Manual

Page: 29 / 46

29
Electrical Installation
Digital logic- outputs ( open- emitter)
Logic outputs 1 to 3 are for laid out for 12/ 24 V and 1 A . Short time 2 A.
Attention :
The auxiliary voltage is also the power supply for the logical outputs.
An energy saving program can be programmed. ( clocked output).
Logic output 4 ( brake 24 V, 3 A ) is available at terminal X 11.
Signal operation ready ( solid state relay) / ready BTB/RDY
Operation ready are off in case of fault indications, if Auxiliary voltage is low ( <10 V)
The function of indication „ under voltage in DC link ” can be programmed.
BTB with or without under voltage monitoring . ( BTB-power )
Co
n
tr
o
ls
ig
n
a
ls
Output voltage
On-level
max. +24V
Off-level <1V
Output current nom. 1A
Output current max. 2A
Voltage reference +24V (X1:4)
ground reference GNDE(X1:10)
Output Plug Funktion Status Parameter
+24V for the logic and the auxiliary voltage
Observe the sum of all output currents!
GNDE logic ground