Unitek BAMOCAR-D3, Manual

Page: 15 / 46

15
Electrical Installation
Important instructions
The connection instructions are classified according to the connector numbers respectively
and are mandatory.
All further instructions hereto are non-binding.
The input and output lines can be modified and supplemented, under consideration of
electrical regulations and guidelines
Regulations to be observed are
Connection and operational instruction
Local regulations
EC-regulations like ec machinery directive 2006/ 42/ EG-
EC-regulations for vehicles EC-R 100, ISO 6469, ISO 26262
VDE , TÜV and provisions of professional association.
Electrical installation only in non-energized condition.
Observe safe activation.
Insert shorting bar
Put up warning boards
Installation only by trained personnel in electronics
Compared connected load with type – identification plate details.
Observe correct input of power and auxiliary voltage.
Lay power cable and control cable spatially separated.
Follow emc-guidelines for screen connection and earthing procedures.
Use correct cable cross- section.
Use external insulation watch dog
Attention
Poor or under dimensioned cable connection between the battery and
the equipment can lead to equipment damage.
( braking energy)
Attention :
Power cables from fmc iii to batteries to be as short as
possible. Long cables lead to dynamic voltage-drops due to their
impedance.
These burden the installed capacitors and shorten the life span.
El
ec
tr
ic
al
Ins
tal
lat
ion