EN
39/64
REMOTE CONTROL
–
VIA AN EXTERNAL SIGNAL
It is possible to switch your inverter on and off thanks to an external signal such as Normally Open
(relay contact or switch).
External signal remote control
Solution n°1
Solution n°2
Once the connection has been made,
put the switch on “remote” to enable the remote mode.
External control contact
By the inverter thanks to
a dry contact such as
relay or switch
D
=GND
Option
1
Dry contact terminal n°1
E
=RSB-
Dry contact terminal n°2
F
=RSB+
Option
2
Dry contact terminal n°1
REMOTE
Summary of Contents for UNIPOWER 800.12 PRO
Page 71: ......
