Uniteck UNIPOWER 800.12 PRO, Instruction Manual

Page: 28 / 71

www.uniteck.fr
EN
28/64
BATTERY CONNECTION
CABLES AND FUSES SIZE
DC cables (battery – inverter) must be as short as possible. Do not exceed 1,8 meter.
In order to avoid a voltage drop higher than 5% when the product is used at a high power
(and avoid that the inverter is placed in protection mode), DC cables must be of sufficient
cross section.
The “Low Battery” pr otection can intervene if the voltage drop is excessive between the battery
and the converter.
DC cables must be of the proper color: red for the positive cable, black for the negative one.
In order to protect your installation, especially in case of a short-circuit, use a DC ultra fast fuse on the positive
cable placed as close as possible to the battery.
Here is the table to select your cables cross section and the fuse to use between the battery and the inverter.
Model
Cable cross section
(max 1,8m)
Fuse
Recommended
battery capacity*
UNIPOWER 800.12 PRO 25mm² 125A
Minimum 100Ah
UNIPOWER 800.24 PRO 25mm² 80A
UNIPOWER 1200.12 PRO 25mm² 200A
UNIPOWER 1200.24 PRO 25mm² 100A
UNIPOWER 1800.12 PRO 35mm² 250A
Minimum 220Ah
UNIPOWER 1800.24 PRO 25mm² 125A
UNIPOWER 2400.12 PRO 50mm² 350A
UNIPOWER 2400.24 PRO 35mm² 200A
UNIPOWER 3600.12 PRO 70mm² 500A
Minimum 400Ah
UNIPOWER 3600.24 PRO 35mm² 250A
*For a use of the continous power during 30 minutes per day
!