EN
37/64
Chosen voltage
S1
S2
200V
0
0
220V
ON
0
230V (default setting)
0
ON
240V
ON
ON
SETTINGS
OUTPUT VOLTAGE
OUTPUT FREQUENCY
ECO MODE : SWITCHES 4 AND 5
Eco mode is an energy saving system. Once activated, and when the current charge detected is lower
than 5W during 10 seconds, the inverter turns into standby mode and reduces its selfconsumption to
less than 1W against between 15 to 40W in normal mode.
To activate Eco mode, put switch n°4 on ON position, and Pour activer le mode éco, positionnez
l’interrupt
eur n°4 sur ON, and switch n°5 on 0 position.
Note : When Eco mode is activated, UNIPOWER PRO limits its power at 80%. This mode is not
adapted for electrical devices with a higher power. If your load has inrush current, please turn off
Eco Mode. If not, the inverter will stop and turn into protection mode.
To disable Eco Mode, place switch n°4 on 0 position and switch n°5 on ON position.
SWITCH N°6
This switch function is not available on these models: please keep it in default
setting position 0.
Chosen frequency
S3
50 Hz (default setting)
0
60 Hz
ON
Eco mode
4
5
Enabled
ON
0
Disabled (default setting)
0
ON
Summary of Contents for UNIPOWER 800.12 PRO
Page 71: ......
