7
The battery compartment is displayed:
2. Position the battery pack, making sure the
battery contacts are aligned with the contacts
in the compartment and the battery is placed
on top of the plastic tab, as shown in the
following illustration.
3. Slide the battery pack into the battery bay
while simultaneously pulling the plastic tab
and securing clip until the battery clicks into
place.
4. Replace the battery compartment cover.
Charging the Battery
Before using the PA600 II for the first time, you need to charge it for about 16
hours. After that, you can charge the PA600 II every day to recharge the
battery to full capacity. Charge the PA600 II using the USB charging cable or
the docking station.
CAUTION!
Operating the PA600 II for the first time without the AC adapter,
and without fully charging the backup battery may result in loss of
data stored in RAM memory. When the battery is removed, the
backup battery retains RAM data in memory for 6 hours, please
charge the battery for the period to avoid the data loss in RAM
memory.
NOTE:
To enable the internal battery cell to provide backup power supply,
charge your device with the main battery pack for at least 16 hours.
Plastic tab
Securing clip
Compartment contacts
Plastic battery tab
Battery securing clip
