16
1. To launch Scanner Settings, tap Start
→
Settings
→
System
→
Scanner Settings.
2. The Scanner Control Panel opens.
From here you can configure bar code scanner
parameters such as enabling or disabling bar
code symbologies, setting data transmission
options, configuring magnetic and proximity
reading options, and setting power management
options.
3. To test the bar code scanner, tap the Test
tab.
4. Tap Tools.
5. Tap Enable Scan.
6. To perform auto scan, tap Tools --> Auto
Scan --> Start auto-scan.
7. Choose Interval: 3 secs.
8. Tap Start.
9. Laser scan every 3 seconds and bar code is
scanned automatically.
10. Tap Tools --> Auto-Scan --> Stop AutoScan.
11. To enable the scanner outside of the test
tab, user must enable Scan2Key.exe.This
can be done via the To Kpd tab.
