10
Turning the PA600 II on for the First Time
After you have initially charged your device for about 12 hours, the device is
ready to be used. You can now start up your device where you’ll calibrate the
display, learn some basic stylus usage, and set up the system time zone, date
and time.
Powering On
1. Turn on your device by pressing the power
button on the front panel.
NOTE:
The PA600 II screen ships with a
protective plastic film. You may remove this if
desired by peeling from one corner. The screen
will be more susceptible to scratching without
the film, but will be more readable.
2. The Unitech PA600 II welcome screen
appears for a moment followed by the
Windows CE screen.
Calibrating the PA600 II Screen
The calibrate screen automatically appears when the unit is powered-on for
the first time or after the system is reset.
To calibrate the screen at any time, follow these instructions.
1. Tap Start
→
Settings, and then switch to
the System tab.
2. Tap the Screen icon.
Or press the Func key and ESC key
simultaneously.