Appendix A
Code Bytes Usage
The scanner must be in Configuration Mode for the features requiring code bytes for
configuration. The Enter/Exit Configuration Mode bar code must be scanned before starting the
configuration cycle. User configurable prefix/suffix characters can then be saved by scanning
the 3 digit decimal equivalent of the ASCII character into the appropriate character location with
the code byte bar codes.
Example: To add an Asterisk (*) as a Prefix scan the following bar codes in order.
1.
Enter/Exit Configuration Mode
(3 beeps)
2. Configurable Prefix #1
(1 beep)
3. Code Byte 0
(1 beep)
4. Code Byte 4
(2 beeps)
5. Code Byte 2
(3 beeps)
6.
Enter/Exit Configuration Mode
(3 beeps)
Code Bytes 0–9
³
0
Code Byte 0
³
1
Code Byte 1
³
2
Code Byte 2
³
3
Code Byte 3
³
4
Code Byte 4
³
5
Code Byte 5
³
6
Code Byte 6
³
7
Code Byte 7
³
8
Code Byte 8
³
9
Code Byte 9
49
Copyright 2012 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
